Go to "Device Info" and save you serials with a snipping tool
Go to spoof tab and click permanent spoof, you motherboard should be detected just click SPOOF, If not detected click on "other"
Now spoof MAC-Address, There are 2 options, one for ethernet (cable) and another for people with wifi
The PERM MAC SPOOF is for ethernet (intel and realtek) only
WIFI MAC SPOOF is for people with wifi adapters (this option also works for ethernet cable)
Now Restart you PC and check you serials again should be green.
First of all
Plug in a USB to you computer (Must be 32GB or less, not more)
Right-click on the USB drive in Windows Explorer and click on "Format".
Change File System to 'FAT32', then click on start and wait.
Unlocking Setup
Download this file and extract it and put the files on the usb
It should look like this the usb:
Now restart pc and go to you bios, should be F9 in hp, press many times F9 while you restart.
You should see something like this (may vary)
Select "load file from EFI"
Now select you USB
Now select "bootx64.efi"
Now something like this will appear, press Yes.
Now it will boot into Windows again, and the USB can be removed. Incase Windows does not boot, please remove the USB, and wait.
Spoofing Steps:
CLICK ME FOR SEE STEPS
Do the "SPOOFER SETUP" Group and then you can start with the spoofing process
Go to "Device Info" and save you serials with a snipping tool
Go to spoof tab and click permanent spoof, you motherboard should be detected just click SPOOF, If not detected click on "other"
Now spoof MAC-Address, There are 2 options, one for ethernet (cable) and another for people with wifi
The PERM MAC SPOOF is for ethernet (intel and realtek) only
WIFI MAC SPOOF is for people with wifi adapters (this option also works for ethernet cable)
Now Restart you PC and check you serials again should be green.
Go to Boot > Secure Boot > OS Type [Windows] & Secure Boot mode [Custom] Secure boot mode can be found under "Boot configuration"(Don't have it? That's fine!)
Ensure all Default keys are installed. If it shows "0" at all, click "Install Default Keys".
Now open 'KEK Management'
- Choose "Append key" option.
- Press "No" to load it from a file on external media.
- Choose USB file system.
- Choose the "vgk.der" file.
- Select the file format as "Public Key Certificate".
- Enter the GUID (with hyphens) that you saved earlier then press enter. NOT ALWAYS!
-Finally, press "Yes" to append KEK with content from the .der file.
YOU SHOULD NOW SEE A 'SUCCESS' MESSAGE IF YOU DONE EVERYTHING CORRECTLY!
Do the same for 'DB Management' as u did for KEK Management.
Now set up the USB or Vaolume (should appear as UEFI)Partition as Boot priority #1 and Windows Boot Manager as #2.
Every time you turn on your PC you need to have your USB connected and make sure you see that 5 second countdown, if you don't see it, do the steps again.
If you use Volume FAT32 then make sure is in #1 priority boot and you see the 5 second countdown
ONCE ON WINDOWS, DO THIS LAST VERY IMPORTANT STEP!
Download the 'cleanup.exe' file, and run it as admin (CMD will pop up for one second, that's it.)
